[PATCH v3 1/3] Move TAP log-searching feature to common modules

($INBOX_DIR/description missing)  
help / color / mirror / Atom feed

[PATCH v3 1/3] Move TAP log-searching feature to common modules
42+ messages / 1 participants
[nested] [flat]

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v3 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 +++++++---
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..b09273efe5 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 1baf6bd001..8751f48dfe 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -430,30 +430,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or croak "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or croak "could not open \"$filename\": $^E";
+		  or croak "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or croak "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or croak "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or croak "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v3-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

* [PATCH v4 1/3] Move TAP log-searching feature to common modules
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 42+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Some private functions in 019_repslot_limit.pl will be used in other
tests. Move them to common modules so that they are available to the
new tests.
---
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++++
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++-------------------
 2 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 9667f7667e..d78e9f93fb 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2223,6 +2223,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index 20f4a1bbc3..b298d9992f 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_primary->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_primary);
+my $logstart = $node_primary->current_log_position();
 advance_wal($node_primary, 7);
 $node_primary->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_primary,
+ok( $node_primary->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the primary
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/X-Patch; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="v4-0002-New-test-for-timeline-tracking-of-walsender.patch"



^ permalink  raw  reply  [nested|flat] 42+ messages in thread

end of thread, other threads:[~2021-01-05 04:34 UTC | newest]

Thread overview: 42+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v3 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH v4 1/3] Move TAP log-searching feature to common modules Kyotaro Horiguchi <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox