agora inbox for [email protected]
help / color / mirror / Atom feedLIKE indexing proposal
2879+ messages / 3 participants
[nested] [flat]
* LIKE indexing proposal
@ 2003-05-12 17:35 Peter Eisentraut <[email protected]>
2003-05-12 17:45 ` Re: LIKE indexing proposal Tom Lane <[email protected]>
0 siblings, 1 reply; 2879+ messages in thread
From: Peter Eisentraut @ 2003-05-12 17:35 UTC (permalink / raw)
To: pgsql-hackers
I would like to re-table my proposal from many moons ago to allow
pattern-matching operations to use indexes under any locale.
The idea is that since pattern matching works on a character-by-character
basis, we also need to interact with the index using operators that do a
comparison strictly on a character-by-character basis. So we define a
separate set of comparison operators and operator classes for each
character type (text, varchar, bpchar, name), teach the optimizer to use
it for suitably anchored pattern-matching operations, and tell users to
create indexes using that special operator class if they want pattern
matching to use indexes.
Here are a couple of details to discuss:
I named the operators #<#, #>=#, etc. If someone can think of better
names, let me know.
Since character-by-character comparison is essentially binary comparison,
I named the operator classes, text_binary_ops, etc. Another idea is to
name them text_like_ops or text_pattern_ops or whatever, so that if some
change in the pattern matching operations would later force us to alter
the behavior of the operators away from being strictly memcmp(), we would
be free to change them.
Should there be a special case for the C locale? Without extra code, if
you use the C locale and would like to use indexes for both equality and
pattern comparisons, you need two indexes with different operator classes.
That might seem wasteful, but then all locales would really work the same.
I'm unclear on how the selectivity estimation should work. The system
doesn't collect statistics based on the new #<#-style operators, so the
estimates are based on the normal comparison, which might have little to
do with reality.
--
Peter Eisentraut [email protected]
^ permalink raw reply [nested|flat] 2879+ messages in thread
* Re: LIKE indexing proposal
2003-05-12 17:35 LIKE indexing proposal Peter Eisentraut <[email protected]>
@ 2003-05-12 17:45 ` Tom Lane <[email protected]>
2003-05-13 09:26 ` Re: LIKE indexing proposal Peter Eisentraut <[email protected]>
0 siblings, 1 reply; 2879+ messages in thread
From: Tom Lane @ 2003-05-12 17:45 UTC (permalink / raw)
To: Peter Eisentraut <[email protected]>; +Cc: pgsql-hackers
Peter Eisentraut <[email protected]> writes:
> I would like to re-table my proposal from many moons ago to allow
> pattern-matching operations to use indexes under any locale.
Do you have better answers to the objections that were raised the last
time?
In particular, I wonder whether it's worth putting effort into this at
all, rather than trying to make the contrib full-text-indexing support
mainstream-quality.
> Since character-by-character comparison is essentially binary comparison,
> I named the operator classes, text_binary_ops, etc. Another idea is to
> name them text_like_ops or text_pattern_ops or whatever,
text_binary_ops seems a bit of a contradiction in terms :-(. I'd prefer
either of the other choices.
> Should there be a special case for the C locale?
Yes, if only on backwards-compatibility grounds. Database setups that
worked well before should not get arbitrarily broken.
> I'm unclear on how the selectivity estimation should work. The system
> doesn't collect statistics based on the new #<#-style operators, so the
> estimates are based on the normal comparison, which might have little to
> do with reality.
Not sure that this really matters; the selectivity estimation for LIKE
is so crude that I doubt it would get significantly worse. But one
could conceive of storing statistics computed both ways in pg_statistic.
regards, tom lane
^ permalink raw reply [nested|flat] 2879+ messages in thread
* Re: LIKE indexing proposal
2003-05-12 17:35 LIKE indexing proposal Peter Eisentraut <[email protected]>
2003-05-12 17:45 ` Re: LIKE indexing proposal Tom Lane <[email protected]>
@ 2003-05-13 09:26 ` Peter Eisentraut <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Peter Eisentraut @ 2003-05-13 09:26 UTC (permalink / raw)
To: Tom Lane <[email protected]>; +Cc: pgsql-hackers
Tom Lane writes:
> Peter Eisentraut <[email protected]> writes:
> > I would like to re-table my proposal from many moons ago to allow
> > pattern-matching operations to use indexes under any locale.
>
> Do you have better answers to the objections that were raised the last
> time?
The objection last time was that, according to the SQL standard, LIKE
patterns should use the locale-specific collation order for the fixed
parts (instead of character-by-character comparisons), and that under that
rule my proposed solution would fall down.
Time has shown that this objection is poor on four grounds:
1. LIKE does not work that way, and omitting optimizations now based on
possible future changes is a stupid approach.
2. If LIKE were to be changed that way, we can always take the
optimization out.
3. Even if LIKE were changed, certainly POSIX regexps would never be
changed, so you can still use the optimization there.
4. Nobody is seriously proposing to change LIKE that way. And if someone
did, I would object, because the established collation rules make getting
consistent results from this approach impossible.
--
Peter Eisentraut [email protected]
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2879+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2879+ messages in thread
end of thread, other threads:[~2026-04-03 15:23 UTC | newest]
Thread overview: 2879+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2003-05-12 17:35 LIKE indexing proposal Peter Eisentraut <[email protected]>
2003-05-12 17:45 ` Tom Lane <[email protected]>
2003-05-13 09:26 ` Peter Eisentraut <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox