agora inbox for [email protected]
help / color / mirror / Atom feedchar/varchar truncation
2886+ messages / 3 participants
[nested] [flat]
* char/varchar truncation
@ 2002-08-03 02:52 Stephan Szabo <[email protected]>
2002-08-03 04:14 ` Re: char/varchar truncation Tom Lane <[email protected]>
0 siblings, 1 reply; 2886+ messages in thread
From: Stephan Szabo @ 2002-08-03 02:52 UTC (permalink / raw)
To: pgsql-hackers
I wonder if we actually did the right thing with this.
For example:
select cast('ab' as char(1));
Using sql92's definitions, I read TD as
a fixed length character string and
SD as the same.
Which means I think the section that
comes into play is:
SQL92 6.10 GR5 c ii
ii) If the length in characters of SV is larger than LTD, then
TV is the first LTD characters of SV. If any of the re-
maining characters of SV are non-<space> characters, then a
completion condition is raised: warning-string data, right
truncation.
It looks like SQL99's cast specification is similar for this
case.
Wouldn't that mean the operation is supposed to succeed with
diagnostic information since it's a completion condition not
an exception condition?
^ permalink raw reply [nested|flat] 2886+ messages in thread
* Re: char/varchar truncation
2002-08-03 02:52 char/varchar truncation Stephan Szabo <[email protected]>
@ 2002-08-03 04:14 ` Tom Lane <[email protected]>
2002-08-06 05:14 ` Re: char/varchar truncation Stephan Szabo <[email protected]>
0 siblings, 1 reply; 2886+ messages in thread
From: Tom Lane @ 2002-08-03 04:14 UTC (permalink / raw)
To: Stephan Szabo <[email protected]>; +Cc: pgsql-hackers
Stephan Szabo <[email protected]> writes:
> I wonder if we actually did the right thing with this.
> ...
> Wouldn't that mean the operation is supposed to succeed with
> diagnostic information since it's a completion condition not
> an exception condition?
Hm. You are right: an explicit cast to varchar(n) has different
behavior according to the spec than a store assignment (ie,
implicit coercion) to varchar. The implicit coercion should fail.
AFAIR our cast mechanisms aren't prepared to use two different
routines for these two cases. Looks like we have some work to do.
regards, tom lane
^ permalink raw reply [nested|flat] 2886+ messages in thread
* Re: char/varchar truncation
2002-08-03 02:52 char/varchar truncation Stephan Szabo <[email protected]>
2002-08-03 04:14 ` Re: char/varchar truncation Tom Lane <[email protected]>
@ 2002-08-06 05:14 ` Stephan Szabo <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Stephan Szabo @ 2002-08-06 05:14 UTC (permalink / raw)
To: Tom Lane <[email protected]>; +Cc: pgsql-hackers
On Sat, 3 Aug 2002, Tom Lane wrote:
> Stephan Szabo <[email protected]> writes:
> > I wonder if we actually did the right thing with this.
> > ...
> > Wouldn't that mean the operation is supposed to succeed with
> > diagnostic information since it's a completion condition not
> > an exception condition?
>
> Hm. You are right: an explicit cast to varchar(n) has different
> behavior according to the spec than a store assignment (ie,
> implicit coercion) to varchar. The implicit coercion should fail.
>
> AFAIR our cast mechanisms aren't prepared to use two different
> routines for these two cases. Looks like we have some work to do.
As a note, looking at the spec again, cast(12 as char(1)) should fail
while cast('12' as char(1)) should succeed with notice, and both 12 and
'12' should fail when being put into a column of char(1). So, it's
dependant on both whether cast() was used and on the source type.
I went poking around a little bit looking at the stuff in
parse_coerce.c and related, but haven't had time to look
too deeply at its callers.
Right now there are two paths that seem to be be able to cause the length
errors. One is in coerce_type_typmod, the other is in the type's input
function (for conversion from unknown). For the call to the input function
from coerce_type it looks like we wouldn't need to pass a non -1 typmod
since the coerce_type_typmod that really should follow (since without it
you'd get broken behavior in the non-unknown case) would catch it. That'd
allow us to fix the behavior through only one path. I assume that the
input function would continue working in the same fashion for non -1
typmods. This also gets us around needing to change the input function's
arguments.
I believe that we'd want to store typmod conversion data in the pg_cast
row for the conversion we're doing. coerce_type_typmod could then lookup
the function that way (rather than from the typename and oid). I'm a
little worried about the fact that we would be doing more searches
on pg_cast. Haven't thought of a better way (admittedly having not
searched too hard yet either). This seems preferable to doing some kind
of hardcoded check on the source type since it allows user conversions
to work either way. One side effect of this is that we could end up with
more rows in pg_cast since int->char(n) is no longer quite like int->text
and we'd want to be able to specify what happens for char(n)->char(m).
Does any of that seem reasonable as a starting point for exploration?
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2886+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2886+ messages in thread
end of thread, other threads:[~2026-04-03 15:23 UTC | newest]
Thread overview: 2886+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2002-08-03 02:52 char/varchar truncation Stephan Szabo <[email protected]>
2002-08-03 04:14 ` Tom Lane <[email protected]>
2002-08-06 05:14 ` Stephan Szabo <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox